100watt Grade HM022-3P2S
-
Payment
-
Origin
China Mainland
-
Minimum Order
15
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Description
Slip rings of the HM series are specially fit for small or miniature rotating system of transmitting low controlling signal. Applies noble precious metal reduced noises and interferences between circuits, low friction torque assures long life-span.
Models are available in 4, 6, 12, 18, 24, 30, 36, 46 and 56 circuits with 2A each.
Features
? Compact design
? Compatible with data bus protocols
? No maintenance
? Operating smoothly and reliability
? Convenient to assembly
? Extremely low electrical noise
? Precious metal contact ensures long life-span
Benefits
? Compact for ease of incorporation in small mechanisms. |
? Outstanding signal handling capability to transfer the most demanding communication protocols |
Options
? Operation speed, current &voltage | ? Power ring with 5A and 10A is available |
? Connector | upon 2A rings combination |
? No. of circuits | ? Compatible with digital signal and analog |
? Housing material | signal such as RS series signal, data bus |
? Position of wire outlet | protocols, Ethernet signal and so on. |
? Protection level (dust and water) |
Electrical Parameters
Circuit | 5 circuits |
Rated Voltage | 240VAC/240VDC |
Rated Current | 20A/ring,3rings;2A/ring,2rings |
Dielectric Strength | 500VAC@60Hz,60s between each circuit |
Insulation Resistance | 1000MO/500VDC |
Electrical Noise | <0.01O |
Lead length | Standard 250mm |
Machinery Technology Parameter
Operating Speed | 0-500rpm |
Working Temperature | -40? - +80? |
Working Humidity | =75% |
Contact Material | Precious Metal |
Structure Material | Engineering Plastic or Metal |
IP Rating | IP 54 |
Operational life | = 5,000,000 cycles (Depends upon working temperature, rotating speed, environment and continuous working time) |
Outline dimesion unit
Installation Guide
1.Capsule slip ring is designed for being installed with flange on a sleeve bracket.
2.Rotor must be concentric driven by a flexible link (such as plastic tube or screw tube). Rotor lead wire can
do as this driver at limited-speed.
3.As the photograph shows, screws with washer can be used to install slip ring, these washers can avoid flange
too tight.
Attentions
1.Slip ring can not support the weight of equipment which connects with it, rotating equipment should be
fastened so that its weight will no fall on the rotor.
2.Slip ring should be used in dry, low dust environment. If used outdoor, shield is necessary.
3.The surface of lead wire should avoid being damaged while equipment rotating, all lead wire can not bear
weight while you put the lead wire in order.
4.No damaging the surface of lead wire while barking its end.
- Kilowatt Grade HMT2578-3 15 Pieces / (Min. Order)
- Three Channels RF Rotary Joint 15 Pieces / (Min. Order)
- Centre Collector Rings 15 Pieces / (Min. Order)
- HMT012-6 15 Pieces / (Min. Order)
- Artillery Series 15 Pieces / (Min. Order)
- Gyro Series 15 Pieces / (Min. Order)
- Ship Borne Series 15 Pieces / (Min. Order)
- Video Optical Transceiver 15 Pieces / (Min. Order)
- Pneumatic Hydraulics Hybrid Slip Rings 15 Pieces / (Min. Order)
- Megawatt Grade HTW190-8 15 Pieces / (Min. Order)
- Megawatt Grade HTW148-18-2MW 15 Pieces / (Min. Order)
- Kilowatt Grade HMT50120-3 15 Pieces / (Min. Order)
- Kilowatt Grade HMT2578-3 15 Pieces / (Min. Order)
- Electrical And Fiber Optical Series 15 Pieces / (Min. Order)
- HG 100203 15 Pieces / (Min. Order)
- HG 90190 15 Pieces / (Min. Order)